While some austenitic stainless steels require cold working to achieve higher yield strengths, such as 304 and 316 condition B (Cond. B) - NITRONIC grades have great strength in the annealed condition. NITRONIC 60 and 50 have around 50 to 60 KSI yield strength - about twice that of annealed 304 & 316 SS.
Topics: cold worked, cond b, hpa level, strain hardened
Open die forgings have been produced in our Tipton operations in NITRONIC 50, NITRONIC 60, C-276, INCONEL 718, HAYNES 625, HASTELLOY B, Cobalt 6B and many more grades. Upsets, flats, rectangular and round bars. From small pieces to bars up to 12 feet long. Stainless ingot of N50 / XM-19 and Duplex 255 arriving any day.
Topics: INCONEL 718, NITRONIC 50, NITRONIC 60, C-276, forging operation, HASTELLOY B, HAYNES 625
This means more inventory availability for alloys NITRONICs 30 / 50 / 60, MONEL 400, INCONEL 601 and 625, 718 and HX sheet & plate. This in addition to our $4M inventory of bar sheet and plate - which adds up to a lot of stock in Nickel and Cobalt products.
Use our webstore to get pricing on available items.
Topics: Uncategorized
OCTG prices continue to decline: "Prices of oil country tubular goods (OCTG) are continuing to decline because..."
Topics: Uncategorized
Link no longer works:
http://www.metal-pages.com/news/story/41387/
Topics: Uncategorized
The wear resistance of the alloy comes from the composition, rather than hardness. Hardness is normally a good rule of thumb, but is not near perfect for predicting wear resistance. Take MONEL K-500 for example - Not a great wear material, but can develop good hardness.
There are applications where the hardness should be similar to harder than the material mated with for optimum wear resistance, and determining replacement items.
Our book available for download shows various couplings of Nitronic 60 vs itself, as well as many other wear materials against themselves and other dissimilar couplings. Get it here.
Go here for more general information on Alloy 60 Wear Resistance.
Topics: Uncategorized
More inventory availability for alloys MONEL 400, R405 and K500. And more INCONEL 625, HX and 718 bar. This in addition to our $4M inventory of bar sheet and plate adds up to a lot of stock in Nickel and Cobalt products.
Topics: Uncategorized
Includes videos of forging ingot on our press forge, and bar on our radial forge.
Topics: Uncategorized
An electric furnace with operating limits of 1100F to 2300F has been delivered. Heat treating of parts and short bars will be available in this 48x72 furnace. Like our other heat treating operations, it will be held in compliance with AMS 2750, a common aerospace specification required for critical applications.
Will located nearest to our open die forging operation, to reduce temperature loss from furnace to die. Electric operation allows a more suitable atmosphere for heating reactive metals, such as Titanium and Molybdenum products.
Topics: heat treating, electric furnace, forging operation
Topics: Uncategorized